Scottish Water / building regulations test

Fully compliant with Scottish Water regulations for new builds on a private supply. Includes everything in the standard test plus antimony, boron and cadmium.

Wyniki w 12–14 dni roboczych Nr ref. DWT02

Dla kogo: New supply installation
Co sprawdza laboratorium: 32 parametry, każdy porównany z wartością zalecaną. Zobacz pełną listę.
Co otrzymujesz: Certyfikat laboratoryjny, wyniki prostym językiem i ocenę inżyniera Pozzani dla każdego przekroczenia.
W zestawie: Sterile sample bottles, sampling instructions, and packaging for sending your samples to the laboratory.
Masz pytania?: Zadzwoń [TODO: +48 …] lub napisz do nas a wskażemy właściwe badanie.

Co sprawdza laboratorium

32 parametry, każdy z wartością zalecaną

Wartości zalecane według: Scottish Water regulations for new builds. Twoje wyniki są z nimi porównane, a obok zachowujemy dokładne sformułowanie laboratorium.

Parametr	Wartość zalecana	Co mówi ten wynik
pH (jednostki pH)	6.5–9.5	Acidity. Low pH can dissolve metals from pipework.
Iron (µg/l)	200 µg/l	Causes staining and discolouration.
Manganese (µg/l)	50 µg/l	Causes black staining and taste.
Lead (µg/l)	10 µg/l	Usually from old pipework or fittings. A health parameter.
Zinc (µg/l)	Brak limitu	From galvanised pipes and fittings. A taste parameter rather than a health one in England.
Copper (mg/l)	2 mg/l	From copper pipework, especially with soft or acidic water.
Calcium (mg/l)	Brak limitu	A hardness mineral. No health limit.
Magnesium (mg/l)	Brak limitu	A hardness mineral. No health limit.
Nitrate (mg/l)	50 mg/l	Often from agricultural run-off into private supplies.
Nitrite (mg/l)	0.5 mg/l	Forms where nitrate is being broken down; a sign of contamination or poor disinfection.
Fluoride (mg/l)	1.5 mg/l	Naturally present in some groundwaters.
Arsenic (µg/l)	10 µg/l	Naturally occurring in some rocks; a health parameter.
Chloride (mg/l)	250 mg/l	Salt. High values suggest seawater, road salt or sewage influence.
Sodium (mg/l)	200 mg/l	Salt; also raised by water softeners.
Sulphate (mg/l)	250 mg/l	From natural minerals. High values taste bitter and can have a laxative effect.
Conductivity (µS/cm)	2500 µS/cm	Overall dissolved mineral content.
Taste (stopień rozcieńczenia)	Akceptowalny, bez nietypowych zmian	Assessed by the laboratory; should be acceptable with no abnormal change.
Odour (stopień rozcieńczenia)	Akceptowalny, bez nietypowych zmian	Assessed by the laboratory; should be acceptable with no abnormal change.
Turbidity (NTU)	4 NTU	Cloudiness of the water.
E. coli (cfu/100ml)	0 /100ml	Indicates faecal contamination. Should always be absent.
Colony count 22°C (cfu/ml)	Bez nietypowych zmian	General bacterial load; no fixed limit, watched for change.
Colony count 37°C (cfu/ml)	Bez nietypowych zmian	Bacteria that grow at body temperature; watched for change.
Coliform bacteria (cfu/100ml)	0 /100ml	Indicates the supply may not be adequately protected or treated.
Ammonium (mg/l)	0.5 mg/l	Also reported as ammonia. Suggests sewage or agricultural contamination.
Hardness (mg/l CaCO3)	Brak limitu	Scale-forming minerals. Not a health parameter.
Aluminium (µg/l)	200 µg/l	From soils and treatment chemicals; causes discolouration.
Boron (mg/l)	1.5 mg/l	Required for Scottish new-build compliance.
Cadmium (µg/l)	5 µg/l	Required for Scottish new-build compliance.
Antimony (µg/l)	5 µg/l	Required for Scottish new-build compliance.
Chromium (µg/l)	50 µg/l	Industrial metal. Required for Scottish new-build compliance.
Enterococci (cfu/100ml)	0 /100ml	A second indicator of faecal contamination.
Clostridium perfringens (incl. spores) (cfu/100ml)	0 /100ml	A hardy faecal indicator. Required for Scottish new-build compliance.

Dodatki opcjonalne

Legionella
Legionella spp.
£39.95 z VAT
Mercury
Mercury
£37.03 z VAT
Pseudomonas aeruginosa
Pseudomonas aeruginosa
£30.85 z VAT
Total organic carbon
Total organic carbon
£45.62 z VAT

Co jest w zestawie

Wszystko, czego potrzebujesz do pobrania próbki

Sterile sample bottles, sampling instructions, and packaging for sending your samples to the laboratory.

Pobieranie próbki

Dziesięć minut, potem wysyłka tego samego dnia

Pełna instrukcja jest w zestawie. W skrócie: pobierz próbkę rano z kranu, z którego zwykle pijesz, napełnij butelki do kreski, trzymaj w chłodzie i wyślij do laboratorium tego samego dnia w dołączonym opakowaniu.